Standard Features: Hot Dip Galvanized Trailers and Skids, Radiator Enclosure, Battery Box and Wheels. Zinc Plated Jacks. Emissions Certified Engines by CAT, Perkins. and John Deere. DOT LED lights. Electric Brakes with Safety breakaway. Locking Battery Box. Guards are fitted as standard to all moving parts. The Priming System: The POWER PRIME line of end suction centrifugal pumps come with a fully automatic priming system built into the design. This enables the pump to self-prime from completely dry conditions, even with extended suction lines. The priming system utilizes a standard air compressor, which feeds a pneumatic ejector mounted above the air/water separation tank. With this device, suction lifts up to 28ft. (8.5m) can be achieved. Solids Handling: The pumps can handle raw unscreened sewage, trade effluents, thick slurries and solids from 1.5” (38mm) to 3.5" (90mm) in diameter. The Impeller: Impeller designs include a three vane design for pumping under most conditions. The impeller is mounted on a 431 stainless steel shaft fitted to a cast iron bearing bracket; which also provides concentric location for the pump volute. The impeller is of a fully open design with balance holes and back pump out vanes. The pump casing is fitted with replaceable wearing parts, consisting of the impeller and wear plates, to simplify and reduce costs of pump rebuilds. Mechanical Seals: The mechanical seal is leak tight and suitable for sewage and sludge. The seal uses a silicon carbide rotating face mounted to a silicon carbide stationary seat with Buna -N  or Viton seal elastomers. The arrangement incorporates an oil-filled seal housing to lubricate the seal faces. Material Options: Material options include: Ductile Iron bearing frame with an Iron pump casing and fitted with 316 stainless steel or 2% chromium steel alloy (340 BHN) impeller and wearplates; complete 316 stainless steel wet ends; complete CD4MCu wet ends; or complete high chromium alloy (500 BHN) wet ends.

The Power Prime^TMLine of End-Suction Centrifugal Pumps

Documents Available: If annotated with these symbols, supporting documents are available.
= Diesel = Electric = Sound Attenuated = Trailer Mount = Skid Mount

Standard Duty Industrial Pumps

Power Prime^TMStandard Duty pumps are the Hallmark of the Power Prime^TMpump line and range in size from 3" to 12" with flows from 625 GPM to 6,900 GPM. These pumps are end suction centrifugal pumps with a fully automatic priming system built into the design. This enables the pump to self-prime from completely dry conditions.

The pumps can handle raw unscreened sewage, trade effluents, thick slurries and solids from 1.5” (38mm) to 3.5" (90mm) in diameter.

DV-80C Size: 4" x 3" The pump can handle raw unscreened sewage, trade effluents, thick slurries and solids up to a normal limitation of 3.0” (76.2mm) diameter.		DV-100c Size: 6" x 4" The pump can handle raw unscreened sewage, trade effluents, thick slurries and solids up to a normal limitation of 3.0” (76.2mm) diameter.		DV-150c Size: 8" x 6" The pump can handle raw unscreened sewage, trade effluents, thick slurries and solids up to a normal limitation of 3.0” (75mm) diameter.
DV-150i Size: 6" x 6" The pump can handle raw unscreened sewage, trade effluents, thick slurries and solids up to a normal limitation of 3.0” (77mm) diameter.		DV-175c Size: 8" x 6" The pump can handle raw unscreened sewage, trade effluents, thick slurries and solids up to a normal limitation of 3.0” (72.6mm) diameter.		DV-200c Size: 12" x 8" The pump can handle raw unscreened sewage, trade effluents, thick slurries and solids up to a normal limitation of 3.375” (85.725mm) diameter.
DV-300i Size: 12" x 12" The pump can handle raw unscreened sewage, trade effluents, thick slurries and solids up to a normal limitation of 3.5” (89mm) diameter.

Part of the WOSCO family:  www.rainforrent.com  |   www.lakecompany.com  |   www.powerprime.com

[ HOME ] [ Pump Line ] [ Contact ] [ About Power PrimeTM Pumps ]

PO Box 2248, Bakersfield, CA 93303-2248, 800-647-7246, sales@powerprime.com 2007 Power PrimeTM Pumps. All Rights Reserved. For questions about this site, please email our webmaster. The marks Power Prime and Power Prime Logo are registered trademarks of Western Oilfields Supply Company in the United States and foreign countries.