Pump Line
Pipe and Fittings
Pump Documentation
Bypass Documentation
Pump Troubleshooting
More Documents
Standard Features:
- Hot Dip Galvanized Trailers and Skids, Radiator Enclosure, Battery
Box and Wheels.
- Zinc Plated Jacks.
- Emissions Certified Engines by CAT, Perkins. and John Deere.
- DOT LED lights.
- Electric Brakes with Safety breakaway.
- Locking Battery Box.
- Guards are fitted as standard to all moving parts.
The Priming System:
The POWER PRIME line of end suction centrifugal pumps come with a fully
automatic priming system built into the design. This enables the pump to
self-prime from completely dry conditions, even with extended suction lines.
The priming system utilizes a standard air compressor, which feeds a pneumatic
ejector mounted above the air/water separation tank. With this device, suction
lifts up to 28ft. (8.5m) can be achieved.
Solids Handling:
The pumps can handle raw unscreened sewage, trade effluents, thick slurries
and solids from 1.5” (38mm) to 3.5" (90mm) in diameter. The Impeller:
Impeller designs include a three vane design for pumping under most conditions.
The impeller is mounted on a 431 stainless steel shaft fitted to a cast
iron bearing bracket; which also provides concentric location for the pump
volute. The impeller is of a fully open design with balance holes and back
pump out vanes.
The pump casing is fitted with replaceable wearing parts, consisting of
the impeller and wear plates, to simplify and reduce costs of pump rebuilds.
Mechanical Seals:
The mechanical seal is leak tight and suitable for sewage and sludge. The
seal uses a silicon carbide rotating face mounted to a silicon carbide stationary
seat with Buna -N or Viton seal elastomers. The arrangement incorporates
an oil-filled seal housing to lubricate the seal faces.
Material Options:
Material options include: Ductile Iron bearing frame with an Iron pump casing
and fitted with 316 stainless steel or 2% chromium steel alloy (340 BHN)
impeller and wearplates; complete 316 stainless steel wet ends; complete
CD4MCu wet ends; or complete high chromium alloy (500 BHN) wet ends.
|
|
The Power PrimeTMLine of End-Suction Centrifugal Pumps
Documents Available: If annotated with these symbols,
supporting documents are available.
= Diesel
 =
Electric
= Sound Attenuated
= Trailer Mount
 =
Skid Mount
Power PrimeTMStandard Duty pumps are the Hallmark of
the Power PrimeTMpump line and range in size from 3" to
12" with flows from 625 GPM to 6,900 GPM.
These pumps are end suction centrifugal pumps with a fully
automatic priming system built into the design. This enables
the pump to self-prime from completely dry conditions.
The pumps can handle raw unscreened sewage, trade effluents,
thick slurries and solids from 1.5” (38mm) to 3.5" (90mm)
in diameter.
|
|
 |
|
DV-80C
Size: 4" x 3"
The pump can handle raw unscreened sewage,
trade effluents, thick slurries and solids
up to a normal limitation of 3.0” (76.2mm)
diameter. |
|
|
|
|
 |
|
DV-100c
Size: 6" x
4"
The pump can handle raw unscreened sewage,
trade effluents, thick slurries and solids
up to a normal limitation of 3.0” (76.2mm)
diameter. |
|
|
|
|
 |
|
DV-150c
Size: 8" x
6"
The pump can handle raw unscreened sewage,
trade effluents, thick slurries and solids
up to a normal limitation of 3.0” (75mm)
diameter. |
|
|
|
|
|
|
|
|
|
 |
|
DV-150i
Size: 6" x
6"
The pump can
handle raw unscreened sewage, trade effluents,
thick slurries and solids up to a normal
limitation of 3.0” (77mm) diameter.
|
|
|
|
|
 |
|
DV-175c
Size: 8"
x 6"
The pump can handle raw unscreened sewage,
trade effluents, thick slurries and solids
up to a normal limitation of 3.0” (72.6mm)
diameter. |
|
|
|
|
 |
|
DV-200c
Size: 12"
x 8"
The pump can handle raw unscreened sewage,
trade effluents, thick slurries and solids
up to a normal limitation of 3.375” (85.725mm)
diameter.
|
|
|
|
|
|
|
|
|
 |
|
DV-300i
Size: 12" x
12"
The pump can
handle raw unscreened sewage, trade effluents,
thick slurries and solids up to a normal
limitation of 3.5” (89mm) diameter.
|
|
|
|
|
|
|
|
|
|
Power PrimeTM High
Head pumps are end suction centrifugal
pumps with a fully automatic priming system
built into the design. This enables the pump
to self-prime from completely dry conditions.
The pumps can handle raw unscreened sewage,
trade effluents, thick slurries and solids from
1.0” (35mm) to 2" (55mm) in diameter.
|
|
 |
|
HH-80
Size: 3" x 3"
The pump can handle raw unscreened
sewage, trade effluents, thick
slurries and solids up to a
normal limitation of 1.0” (25mm)
diameter.
|
|
|
|
|
 |
|
HH-125c
Size: 6" x 4"
The pump can handle raw unscreened
sewage, trade effluents and
solids up to a normal limitation
of 3.0” (76.2 mm) diameter.
|
|
|
|
|
 |
|
HH-150
Size: 8" x 6"
The pump can handle raw unscreened
sewage, trade effluents, thick
slurries and solids up to a
normal limitation of 1.5” (38mm)
diameter.
|
|
|
|
|
|
|
|
|
 |
|
HH-225c
Size: 12" x 8"
The pump can handle raw unscreened
sewage, trade effluents, thick
slurries and solids up to a
normal limitation of 2” (55mm)
diameter.
|
|
|
|
|
 |
|
XH-100
Extra High Head
Size: 6" x 4"
The pump can handle raw unscreened
sewage, trade effluents, thick
slurries and solids up to 7/8"
(22.23mm) diameter.
|
|
|
|
|
 |
|
XH-150
Size: 8" x 6"
The pump can handle raw unscreened
sewage, trade effluents, thick
slurries and solids up to 1
3/4” (43mm) diameter.
|
|
|
|
|
|
|
|
Clear Water
Agricultural Pumps and Industrial Pumps
These clear water pumps are ideal for
agricultural applications and for construction
work - low flow applications that require
a higher head; ie - long temp water lines.
|
|
 |
|
Cornell Series Ag Pumps
The Cornell Series of Clear
Water Agricultural pumps
range in size from 3" x
5" to 6" x 10". Flows up
to 4,400 GPM, up to
300 FT HEAD
|
|
|
|
|
|
|
|
Cornel Series Industrial
Pumps
The Cornell Series of Clear
Water Industrial pumps range
in size from 2.5" to 6"
x 10" with flows up to
4,400 GPM and up to 420
FT Head |
|
|
 |
|
|
|
|
|
|
|
|
Our Sound Attenuated Pumps are ideal
for noise sensitive job sites.
|
|
 |
|
SA-DV-150i
Size 6" x 6"
Quiet operation with noise
levels as low as 72 dB(A)
at 7m (23ft). The pump can
handle raw unscreened sewage,
trade effluents, thick slurries
and solids up to a normal
limitation of 3.0” (77mm)
diameter. |
|
|
|
|
 |
|
SA-DV-200c
Size 12" x 8"
Quiet operation with noise
levels as low as 72 dB(A)
at 7m (23ft). The pump can
handle raw unscreened sewage,
trade effluents and solids
up to a normal limitation
of 3.0” (76.2 mm) diameter.
|
|
|
|
|
 |
|
SA-DV-300i
Size 12" x 12"
Quiet operation with noise
levels as low as 72 dB(A)
at 7m (23ft). The pump can
handle raw unscreened sewage,
trade effluents, thick slurries
and solids up to a normal
limitation of 3.5” (90mm)
diameter. |
|
|
|
|
|
|
|
|
|
 |
|
SA-HH-150
Size: 8" x 6"
Quiet operation with noise
levels as low as 72 dB(A)
at 7m (23ft). The pump can
handle raw unscreened sewage,
trade effluents, thick slurries
and solids up to a normal
limitation of 1.5” (36mm)
diameter |
|
|
|
|
|
|
|
|
|
|
|
|
|
